Cabinet and Shelf Edges
The U edge profile covers the panel edge completely, removing the risk of edge banding peeling or swelling.
Aluminium Chipboard Edge and Decorative Trim Profiles
Products
Aluminum chipboard edge and decorative strips that protect and beautify your furniture edges. Solutions matching your project with different profile widths and color options.
Cabinet and Shelf Edges Panel Joints Surface Division Lines Return and Corner Details Damp Areas Retail & Display Shelving
Get a Fast Quote 
Modern Design
Aesthetic, elegant profile solutions
High Quality
Durable aluminium profiles and accessories
Easy Installation
Practical to install and use
Wide Application
Kitchen, bathroom, display and office furniture
Made-to-Measure Production
Sizes and designs tailored to your projects
Where Are Panel Edge and Trim Profiles Used?
The panel edge is the weakest point of a piece of furniture: the cut line shows, moisture gets in, impact makes it swell. The profile solves all three at once.
Panel Joints
The H profile joins two panels flush; no gap or level difference shows at the joint.
Surface Division Lines
The T profile breaks up large surfaces to relieve monotony while also hiding the joint.
Return and Corner Details
The return profile softens a sharp corner, reducing knocks and making cleaning easier.
Damp Areas
In bathrooms and kitchens it stops water being absorbed at the edge, extending panel life.
Retail & Display Shelving
Protects the edge against impact on shelves where stock changes frequently.
Product Variants
Every product in this group, with dimensions and product codes. Pick the profile that fits your project and request a quote in one click.
Which Profile Suits You?
Dimensions and weights of every profile in the group, in a single table. Compare the values, pick the code that fits your project — click the code to open its product page.
| Code | Product | Width | Height | Wall Thickness | Weight | Length |
|---|---|---|---|---|---|---|
| SLC 4036 | U Closure Profiles | 21,8 mm | 19,4 mm | 1 mm | 0,155 kg/m | 6000 mm |
| SLC 4041 | U Closure Profiles | 19,4 mm | 7,8 mm | — | 0,150 kg/m | 6000 mm |
| SLC 8070 | U Closure Profiles | 20,3 mm | 15 mm | — | 0,116 kg/m | 6000 mm |
| SLC 4048 | H Profiles | — | — | — | — | 6000 mm |
| SLC 4050 | H Profiles | 17 mm | 21 mm | 1,1 mm | 0,141 kg/m | 6000 mm |
| SLC 4075 | Chipboard Turning Profiles | 35,8 mm | 35,8 mm | 1,1 mm | 0,295 kg/m | 6000 mm |
| SLC 4054 | T Profiles | 16,3 mm | 15 mm | 1,5 mm | 0,145 kg/m | 6000 mm |
| SLC 4055 | T Profiles | 14,1 mm | 7,1 mm | 1,2 mm | 0,064 kg/m | 6000 mm |
Products Used Together
Profiles do not work alone; they are part of a system. The groups most often ordered together in the same project:
1Led Profilleri
Dolap içi, raf altı ve tezgah aydınlatması için led yuvalı profiller. Aydınlatma ile profil hattı tek elden çözülür.
2Kulp Profilleri
Boy kulp, gömme kulp ve gizli kulp seçenekleriyle kapak tutma yüzeyleri. Aynı eksel tonunda seçildiğinde bütünlük korunur.
3Sunta Kenar ve Süs Çıtası
U kapanma, H, T ve dönüş profilleriyle panel kenarlarını kapatır, kesim izini gizler, yüzeyi darbeye karşı korur.
4Raf Profilleri
Dolap ve vitrin içi raflarda taşıma ve kenar koruması. Tek ve çift kanal seçenekleriyle cam ya da sunta raf taşır.
5Köşebent Profilleri
Gövde birleşimlerinde açıyı sabitler, montaj sonrası hizanın bozulmasını önler. 10x10 mm ile 20x40 mm arası kesitlerde.
6Tezgah ve Baza Profilleri
Mutfak gövdesinde tezgah bitişini ve baza hattını oluşturur; su ile nem temasına karşı kenarları korur.
Made-to-Measure Production and Cutting
Measurements and product choices are assessed together; profiles are prepared to suit your project.
Made-to-measure production
The required dimensions and application details are confirmed before the order.
Cut to size
Profiles are prepared for cutting to the agreed dimensions.
- Measurements
- Product selection
- Cutting and preparation
Packaging and Shipping
Packaging steps that protect the product surface and keep orders neatly prepared.
Surface protection
Packaging that protects the profile surfaces.
Orderly grouping
Orders prepared by product and dimension.
Dispatch preparation
Packages are checked before delivery.
Used in These Projects
Bringing aesthetics and function together, our products are trusted across a wide range of interior and furniture projects.
SEHA YAPI
KOZAĞAÇ NEIGHBORHOOD YEŞİL BURSA STREET, 42070 MERAM/KONYA
YALÇINLAR İNŞAAT
HOCACİHAN SARAY, ÖZEV STREET 2A,42080 SELÇUKLU/KONYA
KOBİSAN BAKÜ MİMARLIK
HOCACİHAN NEIGHBORHOOD ŞEHİT ALİ DIĞRAK STREET OUTER DOOR NO:3, D:1, 42280 SELÇUKLU/KONYA
KEREM NÜKTE
SANCAK NEIGHBORHOOD, DOKTOR SADIK AHMET STREET NO:33 SELÇUKLU/KONYA
RM MİMARLIK
BİNKO YAPI
HAVZAN NEIGHBORHOOD MERAM/KONYA
Panel Edge and Trim Profiles — Frequently Asked Questions
The questions we are asked most before quoting. If you cannot find what you need, ask us directly on WhatsApp.
What is the difference between U, H and T profiles?
The U edge profile covers the edge of a single panel. The H profile joins two panels flush side by side. The T profile creates a division line on the surface and conceals the joint. Which one is right depends on the type of junction.
Which panel thicknesses does the profile fit?
The profiles in this group are produced in different channel widths. Compare your panel thickness with the dimensions in the spec table, or send us the measurement if you are unsure.
What is the advantage of a profile over edge banding?
Banding can lift over time with heat and moisture. An aluminium profile seats mechanically, also protects the edge against impact and adds design value to the surface.
What surface and colour options are available?
Black, natural, bronze and anthracite anodised finishes plus white are offered as standard. You can review the tones in the surface finishes section and contact us for project-specific colour requests.
What is the standard length, and do you cut to size?
The standard production length is 6000 mm. Simply state your cut-to-size and packing requirements when ordering.