Kitchen Worktop
Forms the finish along the front edge of the worktop, breaking the drip so water cannot run down into the carcass.
Aluminium Countertop Profiles
Products
Aesthetic and functional aluminum countertop profiles for your kitchens. Long-lasting solutions with water and heat resistant structure. Special pricing for bulk orders.
Kitchen Worktop Kitchen Plinth Islands and Bar Units Bathroom Worktops Office Kitchen & Tea Point Commercial Kitchens
Get a Fast Quote 
Modern Design
Aesthetic, elegant profile solutions
High Quality
Durable aluminium profiles and accessories
Easy Installation
Practical to install and use
Wide Application
Kitchen, bathroom, display and office furniture
Made-to-Measure Production
Sizes and designs tailored to your projects
Where Are Worktop and Plinth Profiles Used?
The worktop edge and the plinth line are the two points in a kitchen most exposed to water and impact. The profile both protects and defines them.
Kitchen Plinth
Separates the underside of the units from the floor. Width options of 100–150 mm set the plinth height.
Islands and Bar Units
On free-standing islands the edge profile sharpens the transition between worktop and carcass.
Bathroom Worktops
Reduces moisture contact on vanity tops; the anodised surface does not stain.
Office Kitchen & Tea Point
Protects the exposed edge in heavily used shared areas.
Commercial Kitchens
Gives a sealed edge on café and restaurant counters — an advantage for cleaning and hygiene.
Product Variants
Every product in this group, with dimensions and product codes. Pick the profile that fits your project and request a quote in one click.
Which Profile Suits You?
Dimensions and weights of every profile in the group, in a single table. Compare the values, pick the code that fits your project — click the code to open its product page.
| Code | Product | Width | Height | Wall Thickness | Weight | Length |
|---|---|---|---|---|---|---|
| SLC 4044 | Baza Profiles | 150 mm | 11,2 mm | — | 0,525 kg/m | 6000 mm |
| SLC 4045 | Baza Profiles | 100 mm | 11,25 mm | — | 0,355 kg/m | 6000 mm |
| SLC 4046 | Baza Profiles | 120 mm | 11,75 mm | 0,9 mm | 0,385 kg/m | 6000 mm |
| SLC 4118 | Counter Profiles | 16,88 mm | 30 mm | 1,4 mm | 0,232 kg/m | 6000 mm |
| SLC 4119 | Counter Profiles | 21,2 mm | 35 mm | 1,2 mm | 0,174 kg/m | 6000 mm |
Products Used Together
Profiles do not work alone; they are part of a system. The groups most often ordered together in the same project:
1Led Profilleri
Dolap içi, raf altı ve tezgah aydınlatması için led yuvalı profiller. Aydınlatma ile profil hattı tek elden çözülür.
2Kulp Profilleri
Boy kulp, gömme kulp ve gizli kulp seçenekleriyle kapak tutma yüzeyleri. Aynı eksel tonunda seçildiğinde bütünlük korunur.
3Sunta Kenar ve Süs Çıtası
U kapanma, H, T ve dönüş profilleriyle panel kenarlarını kapatır, kesim izini gizler, yüzeyi darbeye karşı korur.
4Raf Profilleri
Dolap ve vitrin içi raflarda taşıma ve kenar koruması. Tek ve çift kanal seçenekleriyle cam ya da sunta raf taşır.
5Köşebent Profilleri
Gövde birleşimlerinde açıyı sabitler, montaj sonrası hizanın bozulmasını önler. 10x10 mm ile 20x40 mm arası kesitlerde.
6Tezgah ve Baza Profilleri
Mutfak gövdesinde tezgah bitişini ve baza hattını oluşturur; su ile nem temasına karşı kenarları korur.
Made-to-Measure Production and Cutting
Measurements and product choices are assessed together; profiles are prepared to suit your project.
Made-to-measure production
The required dimensions and application details are confirmed before the order.
Cut to size
Profiles are prepared for cutting to the agreed dimensions.
- Measurements
- Product selection
- Cutting and preparation
Packaging and Shipping
Packaging steps that protect the product surface and keep orders neatly prepared.
Surface protection
Packaging that protects the profile surfaces.
Orderly grouping
Orders prepared by product and dimension.
Dispatch preparation
Packages are checked before delivery.
Used in These Projects
Bringing aesthetics and function together, our products are trusted across a wide range of interior and furniture projects.
SEHA YAPI
KOZAĞAÇ NEIGHBORHOOD YEŞİL BURSA STREET, 42070 MERAM/KONYA
YALÇINLAR İNŞAAT
HOCACİHAN SARAY, ÖZEV STREET 2A,42080 SELÇUKLU/KONYA
KOBİSAN BAKÜ MİMARLIK
HOCACİHAN NEIGHBORHOOD ŞEHİT ALİ DIĞRAK STREET OUTER DOOR NO:3, D:1, 42280 SELÇUKLU/KONYA
KEREM NÜKTE
SANCAK NEIGHBORHOOD, DOKTOR SADIK AHMET STREET NO:33 SELÇUKLU/KONYA
RM MİMARLIK
BİNKO YAPI
HAVZAN NEIGHBORHOOD MERAM/KONYA
Worktop and Plinth Profiles — Frequently Asked Questions
The questions we are asked most before quoting. If you cannot find what you need, ask us directly on WhatsApp.
How is the plinth profile height chosen?
Plinth height is determined by how high the kitchen carcass stands off the floor. The profiles in this group are produced in different widths; compare the dimensions in the spec table and pick the one that fits your project.
Which worktop materials can the worktop profile be used with?
It can be used as an edge finish on laminate, compact and melamine-faced worktops. On natural stone and ceramic the application detail differs, so it needs to be assessed together with the project information.
What surface and colour options are available?
Black, natural, bronze and anthracite anodised finishes plus white are offered as standard. You can review the tones in the surface finishes section and contact us for project-specific colour requests.
What is the standard length, and do you cut to size?
The standard production length is 6000 mm. Simply state your cut-to-size and packing requirements when ordering.
Is there a minimum order quantity?
Stocked codes can be ordered by the length. For custom colours and cuts, quantity and lead time are set per project; for a fast quote, reach us on WhatsApp.